HG6145F
Introduction
The HG6145F device is an equipment produced by FiberHome for fiber optic networks. This document presents the features available on the device when it is managed via the ACS system, enabling remote configuration and monitoring.
Important
The described features were tested and validated in the following version:
- Firmware approved: WKE2.094.373A01- Hardware approved: RP4359- DataModel: TR098
Features supported
Functionality
Login PPPOE
IPv4 DNS DNS IPv6 LAN DNS IPv6 WAN
Bandwidth No Redirection
Ping Yes Traceroute Close networks
Upload firmware
Attention!
Device does not support:
- Functionality of nearby networks
- Bandwidth change
- Mesh network
- Change of web access port
- Remote Factory Reset
Case of use via AI
- Search for connected devices;
- Execution of connectivity tests (ping/tracerout);
- SSID change;
- What? Password management;
- Channel change;
- Port redirecting configuration;
- Web password update;
- firmware update;
Features may vary depending on the firmware and hardware version used. Always check compatibility before making significant changes to the device.
Final considerations
The HG6145F offers a robust set of features for remote management, although with some specific limitations. It is essential to verify the compatibility of versions before making significant changes.